Shop Equipment

• ALI Certified Accessory, Recommended for Atlas® AP-PVL14 & Atlas® AP-PVL14OF-EXT
• 7,000 lb. CapacityAir/Hydraulic Operated
• Two Safety Lock Positions
• Double Screw-Up Adapters Included
• Compact Size with Low Profile
• Smooth Rolling Action
• Scissor mechanism allows for level lifting
• Powder Coated Finish
• This part number Freight Included
• AP-RJ7000 (Manufacturer Part #)
The Atlas® Platinum RJ7000 air/hydraulic rolling jack has telescoping arms that can be extended over the runways of a four post lift. The lift pads at the end of these arms can be positioned under the lifting points that are located over the runways of that four post lift. This rolling jack is equipped with expandable rail supports which adjust to fit between the runways of many different four post above ground lifts. These supports have a unique roller system that allows the rolling hydraulic jack to glide easily under the entire length of the vehicle.
The Atlas® Platinum RJ7000 is an ALI Certified Accessory recommended for the Atlas® Platinum line of ALI Certified 4-Post lifts.
IMPORTANT: The Atlas® AP-RJ7000 is designed and engineered to operate on "delivered" air pressure of between 70-115 PSI. If you exceed 115 PSI, you may damage your jack.
The Atlas® Platinum RJ7000 Specifications:
• Minimum Width: 36"
• Maximum Width: 45 1/2"
• Distance Between Runway Capability: 36" - 45"
• Minimum Lifting Height: 12 1/2"
• Maximum Lifting Height (w/ Adapters): 27 1/2"
• Double Screw-Up Adapter Pad 1 1/2" - 4"
• Air Requirement: 70-115 PSI
• Shipping Weight: 390 lbs

• Perform Alignments 30% Faster with 100% Accuracy
• No Tower, Maximizing Workspace
• No Rolling Compensation Required
• Patented Light Weight Solid Vision 3D Targets
• Two 3D Measuring Heads with 4 Cameras Total
• Quick Locking 4-Point Wheel Clamps included
• Premium Alignment Software Installed
• Wireless Tablet Operated; WiFi Ready
• Portable Trolley, do Alignments in Multiple Bays
• 2 Piar of Removeable Batteries with Built-In Charger

Ravaglioli Powervision 2 Portable 3D Alignment System

Product Description
Spray Cup System uses a simple and efficient four piece design with a durable hard collar, reinforced nozzle, collapsible liner and precise application with paint flow.
Features
850ml Paint System 50pcs liner+50pcs lids + 20pcs stoppers+1outercup+1collar -190 Micron Filter

Color: Red
Product Type: Parts Washer
Material: Steel
Dimensions: 45" x 21.25" x 35.5"
Reservoir Capacity: 40 Gallons
Reservoir Working Capacity: 22 Gallons
Pump Output (GPH): 50
Voltage: 115 V / 60 Hz
Power Cord: 5'
Weight: 107 Lbs.
Solvent Type: Water-Based Solvents Only
Special Features: Removable Work Shelf/Parts Basket|Comes with Flo-Thru Brush
Certification: UL

Color: Red
Total Capacity: 1,300 Lbs.
Work Top Capacity: 650 Lbs.
Caster Size (in.): N/A
Caster Type: N/A
Number of Casters: 0
Wheel Type: N/A
Number of Shelves: 1
Shelf Dimensions: 61” x 25”
Shelf Capacity: 650 Lbs.
Drawer: N/A
Drawer Dimensions: N/A
Drawer Capacity: N/A
Dimensions: 61” x 25” x 36”
Adjustable Height: N/A
Material: Steel
Steel Guage: 14 ga
Weight: 126.5 Lbs.
Warranty: 1 Year

Ruler with standard / metric measurements and several reference charts including SAE/Metric, fluid, and oil to gas ratios have been printed on the mat using long lasting heat transfer sublimation
Fully stitched edge prevents fraying to keep your mat serviceable and looking good
Mat is flexible and easily rolls up for storage
Exact Measurements: 16" x 35.75 x 1/8" thick

Enables you to securely hold and rotate small engines, transmissions and other components while working
This holding fixture will handle pieces weighing up to 250 pounds and it offers 360 degrees of rotation with positive stops at 90 degree increments
Three sides of the mounted unit remain fully exposed
Movable arms can be removed when not in use
Designed to ensure damage-free installation.
Made in the USA

Push or tap tool with a hammer to remove valve keepers
Magnetic tool body captures the keepers for quick removal and valve disassembly
To install, load keepers into the installer
Can be used on the car or a work bench

Fully adjustable lifting saddle with four ratchet adjustment fingers that quickly adjust to the transmission pan configuration
Low lift height of 35" for easy transfer of transmission from jack to work bench. Maximum lift height of 75" accommodates all technicians
Foot activated pedal raises air cylinder's ram to maximum load in seconds. Manual pump second stage quickly raises lifting saddle to desired and precise work height
Convenient hand grip for pushing or pulling load when the load is in the lowered position
Heavy duty nylon locking strap with ratchet fingers for securing the load to the lifting saddle

Capacity: 1,100 Lbs.
Product Type: Hydraulic Lift Table
Power Type: Hydraulic
Operation Type: Manual/Foot Pedal
Caster Quantity: 4
Caster Type: Qty 2 Fixed |2 Swivel (Locking)
Caster Size (in.): 5"
Wheel Type: Polyurethane
Release: Hand Control
Foot Pedal Cycles to Maximum Height: 27
Handle Length: 38 7/8"
Material: Steel
Max. Table Height: 35.75"
Min. Table Height: 11.5"
Table Dimensions: 32" L x 19.5" W
Warranty: 1 Year
1,100 lb. capacity.
Foot pedal-operated table smoothly lifts and lowers engines, transmissions, heavy packages, and cargo.
Lifts 32" x 19-1/2" table from 11" to 36".
Heavy-duty, all-steel construction with four wheels and two-wheel brakes.
Handle-mounted pressure release

This holder accommodates up to 4 large bumpers, helping you organize and streamline your workspace
The adjustable support arms provide flexibility for various storage needs, and the 4″ locking wheels ensure easy maneuverability around the shop.

Built with durable, patented steel brackets and a powder coat finish, this holder is designed for longevity and reliability.

Easy-to-assemble, adjustable powder coated steel painting and drying rack
Great for painting auto parts like hoods, doors, fenders, and tailgates
17 mm wrench included to assemble casters
Includes 6 sturdy steel hanging hooks

Capacity 3,300 LB.
Maximum Lift Height 71 1/4"
Minimum Lift Height 29 1/4"
Expandable Lifting Platform Length: 68 1/4" - 79 3/4"
Platform Width: 31 3/4"
Tilting Angles of +/- 5.1 degree (left/right) - +/-2.2 degrees (front/rear)
Motor/Electrical Requirement 110 volt single (1) phase (A 30 amp breaker is recommended)
Shipping Weight 1,500 LBS.

Top tray dimensions are 29" x 20" x 1" with a new feature designed to house working air tools, also with a standard screwdriver and pry bar holder
New drawer 1" in depth
Capacity: 220 lbs.
Adjustable from 34" to 47.75"
Large swivel casters and a wide stable base

ECO DUAL GAS R134a/R1234yf AC Machine

Type of refrigerant R-134a and R-1234yf
Display 7'' color touchscreen
Voltage 110V 60 Hz
Hybrid function Standard
Vacuum pump 100 L/min (3.5CFM)
Gas analyzer Standard
Sealed compressor 2 x 1/3 HP
Flushing Kit Optional
Recovery speed 300 g/min in liquid phase
Bottle heater Standard
Tank scale resolution 10 gr
Printer Standard

Working temperature range 11/49 ˚C
Non-condensable gas purge Automatic
Filter system 2 filters for humidity
Database Standard
Refrigerant tank 2 x 30 lbs.
Status light Standard
Hoses 2 pair, 3 meters each
Dimension / weight 27” x 25” x 43” / 242 lbs.
Service valves Automatic
Dimension / weight with packaging 36” x 29” x 50” / 264 lbs.
Leak check in vacuum Standard
P/N: EEAC800

Automatic Rim Diameter Range
3” - 15” | 7.6 - 38cmAutomatic Rim Width Range
8”- 32” | 20 - 81cmManual Rim Diameter Range
1”- 20” | 2.5 - 51cmManual Rim Width Range
37” | 84cmMax. Wheel Diameter
154 lbs. | 70 kgMax. Wheel Weight
230V 1Ph 60 HzPower Supply
65”x 54”x 53” | 165x137x135cmDimensions HxWxL

Universal Wheel Lift